魔兽棋盘攻防计分器模型 - MTG
Attack and Defense Counter for Magic: The Gathering Creatures - MTG
使用说明
- 所有模型资源均由用户上传分享,内容来源于网络公开资源
- 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
- 模型将通过邮件发送(5分钟内自动发货),感谢理解带宽压力
关于费用
我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!
扫码手机访问
抖音私信 @jobsfanSummary
Designed to replace dice and eliminate the time wasted searching among their faces.
The system is user-friendly, simple, quick, and easy to 3D print.
You just have to stick the plain side of the base (oposite to the side where the pins are stored) with main body with super glue. This way this "lid" acts as a spring when you introduce the pins and don't let them fall down.
Essentially, it's a small box with holes housing 2 indicator pins inside.
Each of these pins is meant for use in Attack and Defense.
The holes are divided into 4 rows of 5 apiece, totaling 20 holes for each pin.
The controlling player can place the pins to adjust their creature's properties.
Positioning a pin in the first attack hole and the first defense hole creates a 1/1 creature (or +1/+1, as preferred).
Putting a pin in the third attack hole and the fourth defense hole results in a 3/4 creature.
Setting the pin in the second row, third column for attack and the second row, fifth column for defense yields an 8/10 creature.
Placing the pin in the fourth row, fourth column for attack and the third row, second column for defense brings forth a 19/12 creature.
And so forth.
Images have been uploaded for clear understanding.
It might seem complex, but as these are always multiples of 5, only quick calculations like 5+2 or 10+3 or 15+4 are needed. This approach is much faster than searching for a specific face on a 20-sided die.
And that's without considering that if attack and defense don't match, then 2 20-sided dice are required.
Lastly, I'd like to clarify that the system is designed for values to be set from the controlling player's perspective. Feel free to modify the file (mentioning it's a remix of this one) to create a system where both players can read the values (though calculating from the opposing viewpoint isn't difficult).
Please, if you download it, leave a like. Comments are always welcome.
Enjoy!
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Resolution:0.2 mm
- Infill:20
- Filament brand:
Any
- Filament color:
Any
- Filament material:
PLA
Tags
License
Attack and Defense Counter for Magic: The Gathering Creatures - MTG
by NicoAlmazan is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
猜你喜欢
联系我们
最新模型
-
USB Type-C 防尘插头2025-05-17
-
Ender Board 螺丝模式2024-05-08
-
带耳或不带耳箭尾扣位2024-05-08
-
WoodCrafters CD36P2-PW 门铆钉支撑架2024-05-08
-
小型乐高宇宙战舰展示底座2024-05-06
最热下载
-
DOOM(2016)超级散弹枪(改进版并缩放)2023-03-26
-
替换式膨胀喷嘴,适用于FLEXTAILGEAR小型泵。2024-03-18
-
3D模型标题1:kp3s orca slicer2024-04-07
-
法兰尺寸测量工具(小)2024-04-19