Welding Hood Light Clips

2023-08-27 02:16:53

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I had trouble seeing my test pieces in my school's dark welding booth so I modeled up these clips that mount under the adjustment knobs on the hood's temples and hold small flashlights. There are 2 different sets of files, one for lights with a 16mm barrel and the other for a 15.8mm barrel. The 16mm clips fit the Coast G20 inspection flashlight that I got at the home depot for ~$10 per light. The 15.8mm clips I sized for some cheap-o inspection lights from amazon. Marked Left and Right because they are angled in at 5 degrees. You want to install them correctly otherwise you end up with Admiral Ackbar eyes and they will be completely ineffective.

Printed on an Ender 3, PLA, .2 layer height, no supports.

Remixes welcome, not for commercial use.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
Any
Filament brand:
Inland
Filament color:
White
Filament material:
PLA
Notes:
Print them in whatever material you want, printed mine in PLA cause I had it on hand and they are holding up great, but I bet TPU wouldn't work very well, lol. Infill % doesn't really matter, there is such a small area that even needs it, I think I printed mine at 10 or 15%.