迷你-Z小型箱体
Mini-z van bus body
2023-03-26 17:08:54
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfanIt's a bus/van body designed for Mini-z. Fun to drive! There are side skirts for each wheelbase.
There are different front clips to adjust the height. I use the +1. I also had good luck with tire tape.
CA glue for the tail lights, headlights, grille and side clips.
If you decide to run ground effect parts: there is a splitter and a front bumper cover- you can use either.
I run the front bumper cover because it doesn't grab the side rails as
much.
Print the body upright (as it would be on the track, wheels down!) at .2 layer height with 10% support density.
Also- have designed molds to vacuum form windows. I might post those later.Thanks!
Added a video:
https://youtu.be/fBeWkC6ZU68
window molds: https://www.thingiverse.com/thing:5605651
Added pick up truck version:https://www.thingiverse.com/thing:5839618
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
联系我们
邮箱: 289047960@qq.com
最新模型
-
Gaggia压力计磁铁套装2024-05-08 -
瑜伽垫固定挂钩2024-05-08 -
魔术子弹搅拌机 (MBR-1101) - 电机安装底座齿轮更换2024-05-08 -
克勒普顿卷线器2024-05-06
最热下载
-
钥匙扣2023-03-26 -
Gyro Air旋转空气模型2023-03-26 -
伊瑟宁加德骰子塔（奥斯坦克）2024-01-17 -
苹果 HomePod mini壁挂装饰2024-03-19 -
BlueSCSI v2 SPARCstation驱动器支架及密封环2024-04-14