Sleeve Kings E 尺寸卡片盒

Sleeve Kings Size E card boxes

2024-01-06 07:08:17

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This project is very much a work in progress. Test print photos will be added as needed.

This set is for the Size E sleeve only.

The full range of Sleeve Kings compatible card boxes is intended. Starting with Size A at varying heights. Larger cards will have taller boxes.

When each size is completed, the files will be added here. Test prints will be posted. Only the shortest of each will be printed to check for fit where possible. I don't have access to the full range of sleeves.

My gaming group has found that having cards in these, stacks far easier for both storage, and for putting out a stack of cards which don't slip all over the place as sleeved stacks tend to.

All card sleeves available from https://sleevekings.com/

Not affiliated and don't receive any gratuity from Sleevekings. All card names and dimensions are direct from Sleevekings.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.12 to 0.2
Infill:
20%
Filament brand:
Generic
Filament color:
n/a
Filament material:
PLA
Notes:
I have had success at lower infill percentages, but the taller the box, the easier the corners break. I have found 20% the sweet spot for my printer with amount of material vs resistance.