1/18到1/24比例爬行器车轮插件

Wheel inserts for Crawlers 1/18 to 1/24 scale

2024-01-08 12:23:55

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

These are wheel inserts I made are for crawlers. They are inspired by bridgestone airless tire designs. These wheel inserts are for Crawlers 1/18 to 1/24 scale. I made a few different variations on blender. [type1,2,and 3]. The types have different shaped fins, the versions have different spacing between the fins, and there is a thick and thin version of each.

I found that the thin versions worked better in general. I uploaded everything i made in a zip file including the blend file.

The difference between the three versions is the fins are spaced differently. Type one has 1 fin per 10 degrees around the circle, type 2 is spaced 20 degrees around the circle, type 3 is spaced 30 degrees around the circle. in other words . Type 1 has 36 fins, type 2 has 18 fins, and type 3 has 12 fins.

i played with a few different TPU some designs work better depending on the TPU. I have tried a veritey of TPU's such as Overture, Sunlu, sainsmart,and Siraya Tech.

In case anyone was curious:
I use .2mm nozzles.
Each insert is approx. 10g of filament(about 8g ->10 for easy math) Or 40g of filament for a set of 4. A 1KG roll of this filament is approx $40(Siraya Tech). making a set costs approx. $1.60 if i did my math correctly.
There are cheaper TPUs . These inserts are pretty cost effective.

If anyone makes a better version of these and uploads the file, ill be stoked. Crawling is an expensive hobby, hopefully someone finds this useful and could hopefully save a few bucks.