电动车库门开关滑轮组件

Electric Garage Door Opener pulley and trolley bracket

2024-01-19 06:39:26

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Old Stanley Garage door opener. The bracket that holds the trolley and pulley was broken. I Designed a new one using Fusion 360. This one should be stronger than original.
Fitment Notes: Trolley Pipe measured 30mm, new piece is 32.5mm for tolerance. Designed to use existing pulley and pins. I also designed a cap to hold the pin in place, with holes for 2 small screws, no longer than 15mm. (cap may not be necessary). Feel free to remix.

Print Settings

Printer brand:
Bambulabs
Printer:
Bambu X1C
Rafts:
No
Supports:
Yes
Resolution:
0.3
Infill:
50% Gyroid
Filament brand:
Bambu Lab
Filament color:
Black
Filament material:
ABS
Notes:
Printed using a 0.6 nozzle. about a 5 hour print. To prevent warping, using OrcaSlicer, set "reverse on odd" to on, and select "reverse only internal perimeters". Printed on Engineering plate with bed temp set to 100. Regular supports, threshold angle 5.

Tags

bracket door bracket Garage Door garage door bracket trolley

电动车库门开关滑轮组件

朋友，你觉得上面这个模型，属于下面的哪个分类？

上面没有我要的选项

必须全中文，且长度不超过15

相关内容

猜你喜欢

联系我们

邮箱: 289047960@qq.com

热门推荐

最热下载

最新模型