TomTom 骑士 500 球关节套接口适配板

TomTom Rider 500 ball-joint socket adapter plate

2024-03-16 04:09:05

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This is a ball/socket mounting plate for a TomTom GPS. It was designed for the TomTom Rider 500 GPS, but the plate should be compatible with other TomTom products.

There are two types of mounts:

A ball mount, for mounting your TomTom into a ball socket.
A threaded socket mount with tightening collar, for mounting your TomTom onto a ball.

This model is intended to be customized, which is why the OpenSCAD file is included. Nevertheless, I provide mounting plates for two ball sizes, 17 mm and 24.5 mm, corresponding to the ball-mount I have and the ball-mount of the person who requested this design. It is likely that your ball size would be different.

Three OpenSCAD files are required, the primary tomtom_adapter.scad script and two library files:

octsphere.scad - my geodesic sphere library based on an octahedron
isothreads.scad - my simple ISO thread library

Put these files in the same folder as tomtom_adapter.scad or put them in your usual OpenSCAD library folder.

Print Settings

Supports:
No
Resolution:
0.2 mm layer height or less
Infill:
30% cubic or gyroid
Notes:
Use at least 3 perimeters.

Post-Printing

Before assembling, rub some wax from a crayon or candle into the threads. You don't need to gum up the threads with wax. Just apply enough on to lubricate the threads. Some types of plastic have high self-friction.