大型蜥蜴两栖装备全尺寸模型

Anakonda Amphibious Rig Full Scale

2024-03-20 22:32:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

As promised the full scale version of a 40k version of the M3 Amphibie

Some comments on that:
To fix the side pontons to the main hull you just need some 3mm diameter rod. Just in case you insist on printing it, I included a file for the pegs, but honestly any rod will do.

"Main Hull complete" is meant if your printer can handle the details of the cap. Otherwise I would recommend printing "Hull Low Res" and "Cab_HighRes" and fixing it together.

The Details Engine deck and Exhausts go in the back, I hope it is clear where. The big hatch on the back, the Exhaust in the cutouts facing backwards, the two smaler hatches and vent on the wall that faces towards the cap.

Regarding the ramps: everything is measured so that each vehicle transports 4 ramps itself. Note that for single ferry mode you'll need 6 ramps, for double ferry mode (see the epic scale files) you'll need a total of 9 ramps, for tripple ferry mode 12, so 3 Amphibious Rigs carry enough ramps to buld a tripple ferry.
The "ramp raiser" is intended to go in the slot of the side pontons if the ramps are added in a "ferry mode" so stretched out to the side. If you have the ramps stowed away in the driving vehicle or if you want to have them lowered towards the ground to build a ramp for driving up, you don't need them.

Last but not least: technically the weels are raised when the vehicle transfers to ferry mode. But I left that part out for now. If you insist on building it that way you have to play around a bit and position the pegs for the wheels a bit higher. But I guess you will figure that out.

So, have fun!

大型蜥蜴两栖装备全尺寸模型

朋友，你觉得上面这个模型，属于下面的哪个分类？