Wyze Doorbell Pro 45度倾斜式壁挂架

Wyze Doorbell Pro 45-Degree tilt wall mount

2024-03-22 01:04:36

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I needed an angled mount for my Wyze Pro camera and couldn't find an available model, so I took two, smashed them together, cleaned the model up and added a few stabilizing bits, and came up with this.

Works flawlessly with the included wall mount. I've got washers in my image, but as long as you've got big enough screws it'll work without them just fine.

It's a 45 degree angle - if you're facing the camera, the tilt is to your right. You can easily mirror the print before printing to get the opposite angle if you'd like.

Print isn't finicky. I printed at 20% and it's fine and strong enough for me to not worry about breakage.

I just used the screws that came with my original mount to screw into the print, but you can probably just use M3 if you lost the originals and have some lying around.