天气站配备定制辐射屏蔽 - 一件

Weather Station with a Custom Radiation Shield - One piece

2024-04-08 00:03:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Elevate Your Weather Station with a Custom Radiation Shield

Introduction:

Upgrade your weather station setup with a specially crafted radiation shield, designed to optimize sensor performance and accuracy.

This single-piece solution (printed in 4h) enhances your weather monitoring capabilities by mitigating the impact of direct sunlight and external factors on sensor readings.

Printing Instructions:

Employ bridging mode in your slicer software to print the radiation shield seamlessly in one piece, ensuring robustness and durability.

Compatibility:

Compatible with a wide range of 3D printers and suitable for various filament materials, offering versatility in customization and usage.

Assembly:

Mount the printed radiation shield onto your weather station's sensor assembly, ensuring proper alignment and positioning for optimal shielding effectiveness.

Print Settings

Printer brand:
Creality
Printer:
CR-20 Pro
Rafts:
No
Supports:
No
Resolution:
0.28mm
Infill:
20%
Filament brand:
Unknown
Filament color:
Orange
Filament material:
PLA+
Notes:
You need to enable bridging settings in your slicer, the model is designed especially for it, and does not require any support.