1/200比例萨顿V纹理贴图
LUT for 1/200 scale Saturn V
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfanSummary
NOTE; this is a very rough draft. There was a lot of trial and error when I built mine and I modified some of the pieces. I'm hoping someone that's better at making a printer friendly model can take this and make instructions for everyone else to use. You will have to save each piece as an STL to print. The Saturn V is just to show the scale of everything
Here is my 1/200 scale LUT for the Saturn V by Kmobrain. I basically borrowed the launch pad from FernandoF ( https://www.thingiverse.com/thing:4411258 ) and the tower from Byzantium3D ( https://www.thingiverse.com/thing:4712667 ) and modified them a little
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 v2
- Rafts:No
- Supports:Yes
Tags
License
LUT for 1/200 scale Saturn V
by grant1943 is licensed under the Creative Commons - Attribution license.
相关内容
联系我们
热门推荐
-
Huion Kamvas 24 Plus 配件支架2023-04-04 -
卫星天线接收器支架2023-04-04 -
命运博士头盔2024-03-25 -
3D模型: Lula2024-04-07 -
AOS 5 O3 无人机天线架 + Foxeer GPS 定位架2024-04-23
最热下载
-
可定制像素珠子照片面板2023-03-26 -
盐湖插入整理器2024-04-13 -
GLOCK 17（第三代）蓝枪2024-04-13 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
厨房水槽滤网过滤器2025-06-05
最新模型
-
Myuto Flick 19X - 可工作的玩具枪（橡皮筋弹弓状枪）2025-08-17 -
用于加长杆的戴森配件支架2025-07-17 -
私密羞羞娱乐骰子2025-07-15 -
真实玩偶 / 镶有凸圆形玻璃参数的眼睛2025-07-15 -
苍井空老师全身像苍井空跪姿2025-06-27