堆叠式AA/AAA电池夹具
Stacking Accu Holder AA/AAA
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
I liked the design from https://www.thingiverse.com/thing:5460614 all credits to and_craft_3d.
I made this Remix, because i want to place accus in there. Most Accus are a little bit thicker than normal Batterys.
I have the following accus:
AA Varta 2100mAh
AA PowXS 2800mAh.
AAA Varta 800mAh.
AAA PowXS 1100mAh.
I also added a hole under there, if an accu stacking in you can press with a screwdriver or something like that from under to get it off.
I print with 0.6 Nozzle and 0.24 Layer (i print the shell with that settings, too. It Fits Perfectly for me).
Happy Printing.
Print Settings
- Supports:No
Tags
License
Stacking Accu Holder AA/AAA
by Keksianer is licensed under the Creative Commons - Attribution - Non-Commercial license.
相关内容
联系我们
热门推荐
-
武士头巾 - 男妆2023-03-26 -
isobaric 等压型低音喇叭 V1.0 模型2023-03-26 -
平滑的脑科学奖2023-03-27 -
黑武士2游戏手柄改装及配件分离2023-08-23 -
ZOHD Drift - Foxeer Micro Cat 3 mount2024-01-04
最热下载
-
Valorant 杰特的姿态2023-03-26 -
ODCON1 3D打印枪壳（Gun4IR项目，NAMCO GunCon45风格）2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
Dado - 立方体模型2024-03-24 -
索尼NP-FW50电池专用外壳（5个装）2024-04-24
最新模型
-
hgx挤出机头火炮响尾蛇 X3 SWX3 HGX lite 2.002025-07-18 -
兔女郎半身像2025-07-15 -
私密羞羞娱乐骰子2025-07-15 -
原神优菈2025-06-27 -
锅盖收纳锅盖放置挂钩-能防止12cm到32cm尺寸的锅盖2025-06-24