多层堆叠治疗塔

Multi Level Stackable Cure Tower

2024-04-30 01:52:39

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Easy to print and assemble Stackable tower for curing multiple small prints at the same time.

Option one - Magnetized - ready for 5x1 or 5x2mm magnets - super sturdy assembly, but requires a little bit of Supports. Can be printed in 3 parts Bot + Mid + Disc, or only stack a few Bot parts one on top the the other + 1 Disc for the Top.

Option two - No magnets - also No supports needed. Tolerance is 0.4 between each level.

Both Bot parts come pre - punched.
But if you think you want even more light to go through - print in 3 parts (with Mid and Disk) and adjust the Discs to have 0 top and 0 bottom layers, this way you control the infill density only.

All the Bottoms and Disks have a small raised edge which is exactly 0.96mm - so two walls on a 0,4 nozzle.

This one is sized up for Anycubic Mercury Plus, but if someone needs - I can make different sizes on demand.

Print Settings

Printer brand:
Sovol
Printer:
SV07 Plus
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.4
Infill:
10
Filament brand:
Sovol
Filament material:
PLA
Notes:
_NoMag options also don't require supports.
The basic option requires a small bit of support for the magnet holes.