大型潜水手腕表台钟3D模型

Large scale Divers watch desk clock

2023-03-26 20:36:37

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

```html

If you ever wanted a really massive divers watch desk clock -
your dreams have been answered!

However, this little project isn't for the faint hearted!

131 individual parts (or thereabouts).
30 hours printing time - approx @ 0.2mm
(0.1 recommended).
50 metres of filament @ 3mm dia.
400g weight (approx)

This project will require model making skills and lots of patients!
Ideally, all parts should be printed at 0.2 or higher if possible and some fine tuning will be required to make parts fit.

Printed on the MB Rep 2 and Ultimaker 2

Printed with Faberdashery Bling Bling Gold, Robot Silver and Classic Black PLA.

Fully detailed printing spec and assembly instructions included.

UPDATE: 210115
I've had a couple of requests for the face to be printable flat on the bed. You won't get the maximum resolution in that orientation but i've added a new .stl to the list: Face_dial_MB flat.stl

UPDATE: 250115
I've spilt the 'Back thread' file into two individual files:
Back_thread_2_v2.stl
Back_thread_1_v2.stl
Easier to print as two individual parts - the previous file had one thread ring not on the bed - sorry about that!

UPDATE: 300115
Added v2 version of the main body. Split into 2 files:
MAIN_body_1_v2.stl
MAIN_body_2_v2.stl
Simpler geometry - some users were having slicer, printer issues.

UPDATE: 080215
Added v2 versions of the bracelet files:
Bracelet_outer_links_v2.stl
Bracelet_inner_links_v2.stl
Optimised arrangement to fit onto smaller build beds.

UPDATE: 170215
Added a new 'Main clasp' (without support) file.
To use with your slicer support settings

UPDATE: 040815
Replaced Bracelet_inner_links_v2 with a new file:
Bracelet_inner_links_v3 - some of the links weren't aligned to the floor (only an issue if slicing higher than 0.2mm)

UPDATE: 081115
Added a blank face dial: Face_dial_Blank.stl. Add your own branding

UPDATE: 020419
Added a new instruction pdf.v2 with a link to the correct type of clock movement required.
https://www.ebay.co.uk/itm/Silent-Sweeping-DIY-Clock-Quartz-Movement-Mechanism-Clock-Core-Replacement/401593083973?hash=item5d80d02845:m:mpqIstvABnEy050taB_nLvg
select the shortest threaded neck available or even shorter no thread shaft - but you need to glue the movement to the face without the threaded neck.

Enjoy!

```大型潜水手腕表台钟3D模型

朋友，你觉得上面这个模型，属于下面的哪个分类？