Ender 3 Neo/Pro系列打印机 - 喷嘴/探测器安装支架

Ender 3 Neo/Pro hybrid - Shroud/Probe Mount

2023-05-10 07:32:10

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Printed in PLA, but you should be mindful that incorrect shut-down of the printer with a hot-end may melt part of the fan-shroud.

These parts are intended to be used with an Ender 3 Pro X-Axis Carriage, or with an aftermarket direct-drive X-Axis Carriage intended for the Ender 3 Pro.

The Ender 3 Neo has a larger heat-sink, making most Ender 3 Pro shrouds useless as-is. These parts are 'good enough' to get you running, but should likely be improved on. Stock fans are used, stock diverter is used from the original part cooling fan. You may need additional parts. (M3 or M2 screws) Or you may need to remix this design to reduce the hole sizes for the screws to grab the plastic properly.