工具头螺丝夹持 Snapmaker 2.0

Tool head screw holder Snapmaker 2.0

2023-05-10 09:44:48

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

This small add on captures the tool head screws when changing models for the snapmaker 2.0. i have it on a snapmaker A250T top and bottom, unkown if it fits other models.
because of the tight gap between the rail and the screw head it is imortant to have a well calibrated printer and to use sand paper to thin the plastic down. i used a small gclamp to press the cover in place and ran the .1mm plastic guage to check for clearance. to remoe the cover i drill the spiggots out with a 3.5mm drill and print a new one. i was going to insert a tiny screw in the center of the pin to swage lock it inplace but found no need. hopefully i explaned this ok but ask if confused.