博乐飞行器：让孩子们的梦想再次升华
Playmocopter (make your childs dream again)
2023-03-26 15:18:15
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Demo: https://youtu.be/kDULIrcPF-0
Totally useless but very fun. Make your childs dreaming with this Playmocopter. Fully DIY, you can build it, fly with it and give it to your childs WITHOUT battery. The cockpit can be reused with any of your RC models or just to build anything that your childs can play with.
nExcept printable parts you will need:
- 6mm carbon tubes easy to find on internet (cut it 26cm long)
- transparent shrink tube (for carbon tubes so that printed elements attach firmly on tubes)
- Camera Dome for playmo cockpit (https://fr.aliexpress.com/item/32332199815.html?spm=a2g0o.detail.0.0.5d5a6d8dmGQOtH&gps-id=pcDetailBottomMoreThisSeller&scm=1007.13339.291025.0&scm_id=1007.13339.291025.0&scm-url=1007.13339.291025.0&pvid=21df244b-055a-4a22-9f0f-6aa8d9e4ea38&gatewayAdapt=glo2fra)
- Sponge Landing Gear Skids (https://www.aliexpress.com/item/4000424700538.html?spm=a2g0o.order_list.order_list_main.240.513b5e5bl8yrox&gatewayAdapt=glo2fra)
- M3 screws and bolts for frame:n
- Stainless steel M3x10 bolts (pack of 10)
- M3x10 nut (pack of 10)
- 8mm diameter M3x10 flat washer (pack of 10)
- 4mm thick M3x10 round washer (pack of 10)
- Professional grade Phillips screwdriver (size 2)
- Allen wrench for M3x10 bolts (1 piece)
Instructions:
- 1. Preheat the M3x10 bolts to 600°F (300°C) using a propane torch or similar heat source.
- 2. Carefully screw the preheated bolts into the pre-drilled holes in the frame, ensuring not to over tighten them.
- 3. Attach the corresponding washers and nuts, then tighten evenly until snug.
- 4. Repeat this process for all M3x10 fasteners on the frame.
Note: Always wear safety goggles and gloves when handling hot materials. Keep children away from the work area while assembling.
博乐飞行器：让孩子们的梦想再次升华朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
热门推荐
-
2023年度EDC手镯饰品2023-05-10 -
微比特 V1 和 V2 移动套装2024-01-17 -
IKEA Skadis 支持 8 端桌面 USB 充电站2024-03-19 -
统一制 PA6 NPL-Z-03 13.62024-03-29 -
力量感十足的宙斯3D模型2024-04-29
最热下载
-
通用型1/10比例底盘 - DKS基础款2023-03-26 -
尼克公司仿生假手指V3.5.5版2023-03-26 -
拒绝的手势2024-04-19 -
安益卡通 i3 迷你 HGX 轻量挤出器2024-04-21 -
巴黎卢浮宫的三圣母像2025-07-16
最新模型
-
3d打印全向自行车（部分金属在文件里面包含CAD图纸）2025-07-25 -
模块化笔筒链2025-07-19 -
用于加长杆的戴森配件支架2025-07-17 -
一体打印行星齿轮2025-07-15 -
苍井空老师全身像苍井空跪姿2025-06-27