长焦距观测仪

Telephoto Sight

2023-06-22 10:52:44

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I purchased a Sigma 150 - 600 mm zoom lens for my Nikon D7500 camera. Since my camera has an APS-C focal plane, the effective focal length range is 275 to 900 mm. The field of view for this lens is very narrow, and one of the reviews on this lens mentioned adding a sight to assist in aiming the lens. This seemed like a good suggestion, so I designed a simple sight that can attach to the camera using the hot shoe.

The initial attempt resulted in a sight that approximated the field of view at the widest (lowest focal length) setting for the lens. I reduced the field of view by a factor of two on each side for the narrow field of view.

I have included the Fusion 360 design files if you want to make changes.

Print Settings

Printer brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
20%, but probably does not matter
Filament brand:
Duramic 3D
Filament color:
gray
Filament material:
PLA Plus
Notes:
The design should print in the file orientation without need for supports.