Flipper Zero Wi-Fi开发板外壳针脚保护套

Pin Cover for Flipper Zero Wifi Dev Board Case

2023-08-18 17:33:47

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

A friend of mine asked me to print the Flipper Zero - Wi-Fi Dev Board Case by CodyTolene, which looks great. He also asked for a cover for the pins.

It wasn't until I finished a pin cover design that I read through the case's description and noticed CodyTolene had already designed one.

Mine differs in that it wraps around the case to hold itself on. It is meant to bent slighty as you put the case into it. I printed in PLA and it bends easily to let the case in and doesn't permanently deform. It's got a tab along both edges to help hold it in place. It also feels a little flimsy and will come off if you shake the case around too much. But if you're doing that then I think you've got other things to be worried about.

Anyways, figured I'd throw this up there in case anyone wanted to check it out. Big thanks to CodyTolene for the original case. Wish I'd seen your pin cover before designing another but hey, now there are two versions out there. The more the merrier!

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
ANY
Infill:
N/A
Filament brand:
ELEGOO
Filament color:
black
Filament material:
PLA
Notes:
Supports will be needed for this print and I had to dig a big support piece from the inside of the cover's cavity. But no big deal.