2010年Subaru Forester钥匙扣3D模型

Subaru Forester 2010 Key Fob

2024-01-11 03:15:45

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

===> THIS STL IS FOR PLA <===
If you want to print it in ABS (which I would recommend because of its higher temperature resistance) you need to scale it by 101.6% in your slicer because it will shrink as it cools down.

Tolerances are VERY tight so to close your key I would recommend using a vice.

Known flaws:
Screw hole is slightly misaligned (just the clips should be able to keep your key closed).

Post-Printing

After printing

Out of the printer the side touching the heatbed has some white marks so you will want to heat it up with a heatgun (or toaster) for a few seconds until they disappear (see picture).

Also, the corners come out quite sharp so you probably want to get a rotary tool (dremel) and smooth them.