点亮锁光源跟踪模块 V2.0
Lighted Lock Follower v2
2024-01-11 22:55:35
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发货），感谢理解带宽压力
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
This is a remix of the lighted lock plug follower by redcatimaging. It assembles the same as the original follower, but has the following changes:
- The cap (plug) has a ribbed end to make it easier to twist.
- The LED sits much deeper in the follower making it brighter at the tip. (See the photo with 2 followers in it.) This also has the benefit of making a better friction fit.
- The groove the plug slides down now has a place opposite the "on" position that captures the wire bit keeping the plug in.
- The hole the LED fits into in the follower is a bit wider making it easier to fit slightly wonky LEDs into it.
Uses 1 long lead 5mm LED (~25mm leads) + 2 AG5 batteries, as per the original.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V2 Neo
- Rafts:No
- Supports:No
- Resolution:0.15
- Infill:23%
- Filament brand:
?
- Filament color:
White
- Filament material:
PLA
Tags
License
CC BY-NC
Lighted Lock Follower v2
by SgrA8 is licensed under the Creative Commons - Attribution - Non-Commercial license.
朋友，你觉得上面这个模型，属于下面的哪个分类？
必须全中文，且长度不超过15
相关内容
猜你喜欢
联系我们
邮箱: 289047960@qq.com
最新模型
-
苍井空老师全身像苍井空跪姿2025-06-27 -
嵌入式保险杠防护板2024-05-08 -
玛莉德2024-05-08 -
幽灵2024-05-08 -
佩伦038 钥匙扣挂件（钥匙环）2024-05-08
最热下载
-
未识别十字架006A，可嵌入盒（v2）2023-03-26 -
沃帕尔六足行走机器人2023-03-26 -
Ubiquiti UniFi AC Pro 无线接入点支架2024-04-21 -
幻想磁力2024-05-03 -
花环戒指2024-05-08