Ender 3 v3 KE Nebula摄像头Z轴支架
Ender 3 v3 KE Nebula Camera Z Axis Mount
使用说明
- 所有模型资源均由用户上传分享，内容来源于网络公开资源
- 侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
- 模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们
关于费用
我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！
扫码手机访问
抖音私信 @jobsfan
Summary
Z axis mount for Ender 3 V3 KE that is a little higher than the bed of others I have seen. Also reused a base plate to ensure the camera does not move.
I made combining some other mounts that I have seen and tweaking it. Other Z mounts have the camera very low, and I prefer the camera to rise with the print. This pushes the camera a little closer to the front of the printer as well but allows the camera full rotation if needed.
Same screw from https://www.thingiverse.com/thing:6428774 can be used to hold it in place.
Models used to create are https://www.printables.com/model/690810-nebula-x-axis-camera-mount-for-ender-3-v3-ke and https://www.thingiverse.com/thing:6419697.
Print Settings
- Printer brand:
Creality
- Printer:
Ender-3 V3 SE
- Rafts:Doesn't Matter
- Supports:No
- Resolution:.2
- Infill:15%
- Filament brand:
DO3D
- Filament color:
Rainbow
- Filament material:
Silk PLA
相关内容
联系我们
热门推荐
-
装甲巡洋舰盖伊顿号（1899年） 1/700比例模型2023-03-26 -
双头螺栓卡车连接接口磁吸式外壳2023-09-11 -
Skytrak保护壳2024-03-25 -
USB扩展电缆存放盒2024-04-06 -
宜家ANTONIUS散热器悬挂钩2024-04-23
最热下载
-
斯坦利杯2024-01-11 -
伊瑟宁加德骰子塔（奥斯坦克）2025-07-16 -
凯弗·鬼魂追踪者2024-01-18 -
红米手表4号充电基座2024-03-15 -
沙箱建筑模型2024-05-08
最新模型
-
3D木托盘模型2024-05-08 -
幽灵2024-05-08 -
铁匠铺 HO 比例 3D 模型2024-05-08 -
线轴固定器902024-05-06 -
无线电删除板2024-05-06