3dsjs

Valve Index 拇指枪支架

Valve Index Knuckles gun stock

2024-03-28 02:14:40

使用说明

  1. 所有模型资源均由用户上传分享,内容来源于网络公开资源
  2. 侵权投诉:通过抖音私信 @jobsfan 联系我们(需附版权证明),24小时内处理
  3. 模型将通过邮件发送(5分钟内自动发送),感谢理解带宽压力,超过1小时没收到,请联系我们
关于费用

我们是爱好者共建社区,为维持服务器成本,每个模型收取微量费用(仅覆盖基础开支)。我们承诺最低成本运营,感谢您的支持!

扫码手机访问
抖音私信 @jobsfan

Summary

WARNING: to not damage your controllers insure your print medium is slightly softer then the index plastic and sand any sharp/abrasive surfaces and edges before use. i am not responsible for any damage you cause by using this print.

estimated cost: 9-12 USD depending on print material.

for the Valve Index knuckles only.

parts required:
2-3 ft of 1/2" EMT conduit (metal pipe)
4 pairs of #10-24 x 5/8" nuts and bolts

please understand i am no professional and this is my first public print, however that being said please do still report any issues.

if this is what you where looking for please consider sending a buck or two my way to support future testing resin via https://ko-fi.com/ezurth

lastly please once again insure to sand the part after printing so it doesn't scratch your controllers.

how to attach and detach knuckles from stock

Tags

License

CC BY-NC-SA

Valve Index Knuckles gun stock
by Ezurth is licensed under the Creative Commons - Attribution - Non-Commercial - Share Alike license.

Valve Index 拇指枪支架
朋友,你觉得上面这个模型,属于下面的哪个分类?
必须全中文,且长度不超过15

相关内容

猜你喜欢