Rasperry Pi Modular Enclosure 190x98x84

2024-04-08 20:59:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

The is part of a series of modular enclosures for the raspberry pi or similar micro-computers. The aim being to have a series of adaptable modular enclosures that could be used for prototyping and design. The design is not watertight so best suited to dry environments.

The outer enclosure is 190x98x84mm

and the internal cage is 152x67x65mm

Four supports should be printed and plastic M4 and M6 bolts required for assembly. The supports can be replace by M4 and M6 bolts or another improvised method. The aim of the enclosures is to allow improvisation in design and parts.

This particular version has not been 3D printed but an earlier variant was successfully printed and assembled.

If nothing it else it might be suitable as scenery for table table gaming :).

Print Settings

Printer:
I do not own a printer
Notes:
This particular version has not be printed yet but and earlier variant was successfully printed and assembled. Any constructive feedback would be appreciated.