1:100 灵神号探测器模型

1:100 Psyche Spacecraft

2024-04-15 08:58:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Remix of a remix! The Falcon Heavy 8 / Psyche Mission was the first ever launch I saw in person and I wanted to print my own model. Almost a complete remodel using ddThingz remix https://www.thingiverse.com/thing:5570066 as a base. Scaled to 1:100, using general dimensions of the spacecraft and pictures. It is in the Ready For Launch condition. After attempting to print and paint in one go, I stripped the model apart into 20 pieces. Was able to print everything on my Ender 3 Pro, slowly... Needs to be glued together, most parts have attached pins and corresponding holes with the exception of the sensor tube gold cap (notch to the left) and solar cells. The solar cells are printed in black, painted with a silver acrylic paint marker, and the top layer wiped off. I painstakingly modeled the solar cells because OCD. The spacecraft fits on my 1:100 Falcon Payload Adapter (link soon) and onto my OCDed remix (link soon) of AstroNot's Falcon Heavy https://www.thingiverse.com/thing:4357356

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.2mm / .12mm
Infill:
15
Filament brand:
MiKA3D / HATCHBOX
Filament color:
Silk Gold, Silk Silver / White, Black, Red
Filament material:
PLA
Notes:
Slow print on small parts, .2mm on everything but the dish (.12mm for better resolution but will print fine at .2mm) Used supports on Main Body and Dish