奥林巴斯 A16 闪光灯模组

Olympus A16 Flash Mod

2024-04-20 02:56:32

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

Origional project by Oscar Fehlberg: https://grabcad.com/library/olympus-xa-external-flash-cord-1

This mod turns the old Olympus A16 (or A11) flash into a hotshoe flash with cable using type-c or PC sync port. The flash mount also houses a DIY PC-port-to-type-c converter.
There are 5 spring-loaded connectors on the TT350 flash mount, only centered one is needed. Other 4 connector heads and springs can be salvaged for spring loaded connectors in the mounts.
On the flash mount, A needle hole needed to the punched through the hot shoe mount housing to fit a small needle for turning on the flash.

BOM:
1x Godox TT350 flash hotshoe mount replacement
2x Type-c usb female connector
2x PC sync port female connector
4x M3 x 2mm grub screw
1x M3.5 x 12mm screw
1x M3.5 nut

(for PC-port-to-type-c converter:
1x PC sync port male connector
1x Type-c usb female connector)

Additional:
Soldering gun
Epoxy glue