如影行动粘合安装表面适用于MET回声

Osmo Action adhesive mounting surface for MET Echo

2024-04-28 15:50:00

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

I designed this to fit in the vent of my MET Echo helmet as there was no suitable space in the center of my helmet to apply the adhesive mount for my Osmo Action camera.

This fits into the rear center vent and provides a mounting platform for the curved adhesive pad that's supplied with the camera.

I printed this using PETG with 100% infill. It attaches to the helmet using velcro that is ~2cm wide. I'd also suggest adding some rubber around the part that plugs into the vent for a more snug fit. I use a section of old innertube.

I've ridden with this attached for a while now and it's very secure. It isn't subject massive amounts of stress when riding, but I would still recommend 100% infill. Or at the very least a higher wall count than usuall.

Previous to this I printed a similar design for a Drift Ghost camera, also out of PETG with 100% infill. That print is still feeling strong after 2 years of constant use in all weather conditions. And had no issues staying attached to my helmet or wobbling abount.