1:144 高级防御系统 90毫米 GM 通用武器

1/144 HWF 90mm GM System Weapon

2024-04-30 14:53:35

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

Summary

During the development of GM mobile suit, several model of machine guns were designed as a backup to the GM's primary beam weapon with the 90mm GMG-MG79 being one of them. Unfortunately the beam spray gun while powerful has very short practical range, resulting in GM platoons to be outgunned by Zeon adversary until they managed to close the distance. To address this shortcoming and due to its mechanism still functioning in outer space the 90mm MG was chosen as a common platform from which a standard rifle & a support weapon could be further developed. The resulting System Weapon was so modular that a GM could switch its weapon configuration in combat.

This is a 23-parts 3D-printable model that can be used to create GM Rifle, GM Long Rifle, & two variants of GM Machine Gun in 90mm caliber. Most of the parts are interchangeable but each of the barrel type can only be paired with a matching forend. Designed for 1/144 scale gunplas, it can be used by similarly sized action figures. To use with 1/100 scale gunpla upsize the model to 144% and for 1/60 gunpla upsize it to 240% though I'm not sure if it fit the hands of either scale. For human-sized model scaling it up to 1140% should make it similar in length to the FAMAS series and split the model from there.

Print Settings

Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm nozzle x 0.1 layer height
Infill:
15%
Filament brand:
Any
Filament color:
Any
Filament material:
PLA+, PETG
Notes:
Dimension : 95mm x 23mm x 6mm
Weight : 3-5 grams
FDM Printer
Resolution : 0.4mm line width x 0.2 layer height or finer
Wall Thickness : ≥ 0.8mm
Infill : 15%
Support : Yes
Printing Time : +60 minutes
MSLA Printer
Resolution : 0.05mm layer height or finer
Orientation : Arctan of layer height used divided by printer XY resolution
Support : Yes
Printing Time : +2 hours