K米地震桩赛车-RC飞机模型

KMi Earthquake Pylon Racer - RC Plane

2023-05-21 20:05:02

使用说明

所有模型资源均由用户上传分享，内容来源于网络公开资源
侵权投诉：通过抖音私信 @jobsfan 联系我们（需附版权证明），24小时内处理
模型将通过邮件发送（5分钟内自动发送），感谢理解带宽压力，超过1小时没收到，请联系我们

关于费用

我们是爱好者共建社区，为维持服务器成本，每个模型收取微量费用（仅覆盖基础开支）。我们承诺最低成本运营，感谢您的支持！

扫码手机访问

抖音私信 @jobsfan

This text appears to be a set of instructions and settings for 3D printing a specific model, likely an aircraft or drone. Here's a breakdown of the content: **Materials and Settings** * The printer is using LW-PLA-HT, PEG, PLA, PLA+, ePLA-ST, and PETG filaments. * The print settings are: + Layer height: 0.2 mm + Wall thickness: 0.4 mm + Speed: varies depending on the filament (e.g., 40 mm/s for LW-PLA-HT/PETG) + Temperature: varies depending on the filament (e.g., 235°C for PETG, 230°C for PLA/PLA+/ePLA-ST) **Print Settings** * The print settings are set to: + Cura 5.2.2 + Build plate size: 150 x 150 mm + Print time: approximately 30 hours +/- (depending on the filament and print settings) + Support material: enabled for internal supports **Component Settings** * The component settings are set to: + Nozzle temperature: varies depending on the filament + Bed temperature: varies depending on the filament (e.g., 65°C for LW-PLA-HT, 75°C for PETG) + Support material: enabled for internal supports **Additional Settings** * The print settings are set to: + Tolerance: medium + Maximum resolution: 0.5 mm + Maximum travel resolution: 0.5 mm + Maximum deviation: 0.05 mm **Component-Specific Settings** * The component-specific settings are set to: + Nozzle temperature: varies depending on the filament + Bed temperature: varies depending on the filament (e.g., 65°C for LW-PLA-HT, 75°C for PETG) + Support material: enabled for internal supports **Recommendations** * The text recommends using PETG or PLA/PETG filaments for printing certain components due to their strength and durability. * It also suggests using a stronger filament (e.g., PETG) for printing the motor installation. Overall, this text provides detailed settings and recommendations for 3D printing a specific model, likely an aircraft or drone.K米地震桩赛车-RC飞机模型

朋友，你觉得上面这个模型，属于下面的哪个分类？